Dell QLogic Family of Adapters QLogic QME8242 Mezzanine Card User's Guide - Page 59
Linking to a CHAP Target
View all Dell QLogic Family of Adapters manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Enabling CHAP Authentication with QConvergeConsole: QLogic QME8242 Mezzanine Card User's Guide -dspchap In the following examples, the HBA port instance = 0. $qaucli -pr iscsi -dspchap 0 Or: $qaucli -iscsi -dspchap 0 CHAP TABLE Entry: 1 Name: chapdbserver1 Secret: k9Q038iaZwlqPplq012 4. Add a persistent Send Target to discover, and log in with dynamic entries to discovered targets, by issuing the -pa command. The -pa command adds a persistent target. The positional parameters are and . The optional parameters are [-PORT port_num] and [-INAME name]. If the optional port number is not specified, it defaults to 3260. If the optional iname (iSCSI name) is not specified, it defaults to an empty string. Command line options: -pa [-PORT port_num] [-INAME name] Example: In the following examples, the HBA port instance = 0 and the Send Target IP = 10.14.64.154. $qaucli -pr iscsi -pa 0 10.14.64.154 Or: $qaucli -iscsi -pa 0 10.14.64.154 5. To display a persistent Send Target entry, issue the -ps command (you should initially expect a failed connection because the target is not yet linked to CHAP). The -ps command lists persistent (bound) targets. The positional parameter is [hba_port_inst [target_id]]. If no target_id is specified, all targets for the specified hba_port_inst are shown. If neither the hba_port_inst nor target_id are specified, all target_ids for all adapters in the system are shown. Command line options: -ps [target_id] Example: In the following examples, the HBA port instance = 0 and the Send Target IP = 10.14.64.154. $qaucli -pr iscsi -ps 0 Or: $qaucli -iscsi -ps 0 Target ID: 2 hba_no: 0 ISCSI Name: Alias: State: Session Failed IP: 10.14.64.154 Port: 3260 TGT Instance #: 2 6. Link the CHAP entry to the target by issuing the -linkchap command. The positional parameters are , and . The adapter is not reset after this command is issued. Command line options: -linkchap [ ] Example: In the following examples, the HBA port instance = 0, the CHAP number = 1, and the Target ID = 2. $qaucli -pr iscsi -linkchap 0 1 2 Or: $qaucli -iscsi -linkchap 0 1 2 Linking to a CHAP Target file:///T|/htdocs/NETWORK/QLogic/71922/en/chapauth.htm[9/26/2012 4:25:45 PM]