Dell QLogic Family of Adapters QLogic QME8242 Mezzanine Card User's Guide - Page 63

Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide Back to Contents Page Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide Overview Viewing and Changing Adapter Properties Overview In the QConvergeConsole CLI (qaucli) utility, you can view VLAN and teaming overview information by issuing the qaucli -nt -zvt command. (The qaucli is an installation option available when you install the Windows drivers; see Windows Driver Installation and Configuration.) Viewing and Changing Adapter Properties This section provides information on using the QConvergeConsole CLI for: Viewing Adapter Properties Changing Adapter Properties Viewing Adapter Properties Issue the following commands to view the adapter properties. To list all detected QME8242 ports: qaucli -nic -i [cna_port_inst] To view QME8242 information: qaucli -nic -icna [cna_port_inst] To view port Data Center Bridging Exchange (DCBX) protocol information: qaucli -nic -idcbx [cna_port_inst] To view configured port settings: qaucli -nic -iset [cna_port_inst] To view physical link status: qaucli -nic -link [cna_port_inst] To view port information: qaucli -nic -pinfo [cna_port_inst] Changing Adapter Properties NOTE: For an adapter that is teamed or an adapter with VLANS, do not directly modify the adapter properties. To ensure that the properties of all teamed adapters and adapters with VLANs remain synchronized with the team properties, make property changes only on the Team Management page (see Modifying a Team). To configure the QME8242 port, issue the following command: qaucli -nic -n [cna_port_inst] [ < value >] You can set the following properties: file:///T|/htdocs/NETWORK/QLogic/71922/en/windrivr.htm[9/26/2012 4:25:48 PM]