Dell QLogic Family of Adapters QLogic QME8242 Mezzanine Card User's Guide - Page 49
Port-Level iSCSI Parameters
View all Dell QLogic Family of Adapters manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Configuring iSCSI Offload with QConvergeConsole: QLogic QME8242 Mezzanine Card User's Guide $qaucli -pr iscsi -nh HBA_ALIAS "AccountingHBA" Or: $qaucli -iscsi - nh HBA_ALIAS "AccountingHBA" HBA (adapter) Parameters: The following table lists the parameters that may be configured using the -nh option in non-interactive mode. Full Parameter Name Alias Name Allowable Values HBA_Alias HBAALIAS Character string Port-Level iSCSI Parameters This section shows the commands used to display and to modify port-level iSCSI parameters. Displaying Port-Level iSCSI Parameters Use the -c command to view port configured settings. The positional parameter, [hba_port_inst], is optional. If the hba_port_inst is specified, only information for that port is shown. If the hba_port_inst is not specified, information on all ports in the system is shown. Example: $qaucli -pr iscsi -c 0 Or: $qaucli -iscsi -c 0 Displaying Port inst=0 Displaying HBA (Adapter) Level Information inst=0 *** HBA_Alias QLogic QLE8242 HBA_TCP_Max_Window_Size 19537 HBA_Default_Fragment_Reass_Timeout : 0 HBA_Reserved_TCP_Config 0x00000000 HBA_Delayed_ACK off *** Displaying Port General Summary Information inst=0 *** 0. HBA: 0 Port: 1 HBA Port Instance: 0 HBA Model: QLE8242 HBA Serial Number: (000e1e031684)qlutil_GetP3Params1: BoardStr=QLogic QLE8242 ; BoardId=0x26; BoardPortNum=1; PCIFunction=5; MAC_ADDR= 0: E:1E: 3:16:85 FW Version: 4.2.2 Type: Fibre IP Address: 192.168.105.208 Alias: iSCSI Name: iqn.2000-04.com.qlogic:isp8214.000e1e031685.5 User Defined IP Address. IPv4 Address 192.168.105.208 Gateway 192.168.105.178 Subnet Mask 255.255.255.0 IPv6 Protocol is currently disabled. iSNS Disabled. *** Displaying ISCSI Settings inst=0 *** Force_Negotiate_Main_iSCSI_Keys : off iSCSI_Send_Markers off(*) iSCSI_Header_Digests off iSCSI_Data_Digests off iSCSI_Immediate_Data on iSCSI_Initial_R2T off iSCSI_Data_Seq_In_Order on(*) iSCSI_Data_PDU_In_Order on(*) iSCSI_CHAP_Auth off(*) iSCSI_Bidi_CHAP_Auth off(*) iSCSI_Snack off iSCSI_Discovery_Logout on iSCSI_Strict_Login off iSCSI_Error_Recovery_Level : 0(*) iSCSI_Alias Displaying Firmware Settings inst=0 *** FW_Marker on(*) FW_Stat_Alarm off(*) FW_Accept_AEN off(*) FW_Access_Control off(*) FW_Session_Mode on(*) FW_Initiator_Mode on(*) FW_Target_Mode off(*) FW_Fast_Posting off(*) FW_Sense_Buffer_Desc off(*) FW_ZIO_Enable_Mode off AFW_Device_Timeouts on AFW_Delayed_Ack off AFW_AutoConnect on *** Displaying Device Settings inst=0 *** Large_Frames off file:///T|/htdocs/NETWORK/QLogic/71922/en/ioffload.htm[9/26/2012 4:25:41 PM]