Dell QLogic Family of Adapters QLogic QME8242 Mezzanine Card User's Guide - Page 85

User Diagnostics for Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide 4. Under Diagnostic Tests, select one or more check boxes indicating the tests you want to run: Hardware Test, Register Test, Interrupt Test, Loopback Test, and Link Test. (Windows Diagnostic Test Descriptions describes each test type.) 5. Click Run Tests. NOTE: Only one test can run at a time. Multiple tests can run sequentially. To run user diagnostics in the CLI: Use QConvergeConsole CLI (qaucli), a unified command line utility, to manage all QLogic adapter models, including running user diagnostics. The overall option (-pr ) allows you to start the utility with a specific protocol type, either NIC, iSCSI, or Fibre Channel. If you do not specify a protocol, all protocols are enabled by default. Table 1 and Table 2 list the QConvergeConsole commands for selecting a protocol. Table 1. Windows QConvergeConsole CLI-Selecting a Protocol in Menu Mode Command qaucli qaucli -pr nic [options] qaucli -pr iscsi [options] qaucli -pr fc [options] qaucli -npar [options] Description Start QConvergeConsole CLI in interactive mode Issue NIC command line options Issue iSCSI command line options Issue Fibre Channel and FCoE command line options Issue NPAR command line options Table 2. Windows QConvergeConsole CLI-Selecting a Protocol in Legacy Mode Command Description file:///T|/htdocs/NETWORK/QLogic/71922/en/diag_win.htm[9/26/2012 4:26:06 PM]