Epson Apex 200 User Manual - Page 121
Installing Option, Put the option slot cover in a safe place in case you later
View all Epson Apex 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
You can place some 8-bit cards in a 16-bit slot. But if an 8-bit card has an additional skirt along the bottom (which looks like an extra long connector), it must go into an 8-bit slot. If you are installing a video card, be sure to install it in slot 5. Slot 6 contains the parallel and serial interface and the floppy disk controller. To install the option card, follow these steps: 1. Decide which option slot you want to use, then remove the retaining screw from the metal cover plate at the back of the slot. (Hold onto the screw as you remove it so that it doesn't fall into the computer.) Lift out the metal cover, as shown below. Put the option slot cover in a safe place in case you later remove the option card. Keep the screw and washer. You use them to secure the option card to the computer. 2. Unpack the option card and read all the instructions that come with it. If necessary, adjust switches or jumper connections on the card. Installing Option Cards 5-5