Epson Apex 200 User Manual - Page 44
Setting the Type of Display, it to, Expansion, SAVE SETTINGS, Display option
View all Epson Apex 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2. To change the Main memory setting press Enter. The value changes to 256KB. Press Enter again to change it to 512KB. If you press Enter again, the value returns to 640KB. 3. To change the Expansion memory setting, highlight the Expansion option. You can increase and decrease the memory in 64KB increments by using the + and -keys. For example, to increase the expansion memory from 0KB to 256KB, press + four times. The screen displays the following: 640 KB Main 256 KB Expansion ** SAVE SETTINGS ** 4. When you finish setting the amount of memory, highlight ** SAVE SETTINGS ** and press Enter to return to the main menu. Setting the Type of Display Select the Display option in the main menu if you are not using a color graphics monitor or if you change the video card in your computer. Note If you are using the MGA card that came with your computer, make sure that both monitor switches (labelled "color/mono") are set correctly if you are using a monochrome or color graphics monitor. One monitor switch is on the MGA card on the back of the compuer and the other is on the front. See Chapter 1 for instructions.