Epson Apex 200 User Manual - Page 123
Jumper Settings, WARNING
View all Epson Apex 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
5. Secure the retaining bracket to the frame of the computer with the small screw. Jumper Settings Some optional devices require different jumper settings inside the computer. In this case, it is best if your dealer installs the option and makes all the necessary adjustments when you buy it. If you decide to do it yourself, be very careful when you follow the procedures below. There are many system components that can be damaged accidentally. The jumpers you may need to change are on the Main circuit board, Memory card, and Multi-function card (parallel port, serial port, and floppy disk controller). The location of these cards is shown below. WARNING The jumpers on these cards are preset at the factory in default positions. Do not change any of them unless you are sure the option card you are installing requires different settings. If you have any questions, ask your Epson Customer Care Center service representative. Installing Option Cards 5-7