Epson Apex 200 User Manual - Page 145
Software Problems, If the application program does not start, check that
View all Epson Apex 200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
6. If you have been using your hard disk for a long time and begin to see numerous read/write errors, you may need to reformat the hard disk. If you decide to do this, follow these steps: Back up all the data on the disk using the BACKUP command (described in the MS-DOS manual). Follow the instructions in Appendix D to perform a low-level format. Follow the instructions in Appendix E to prepare the hard disk for use. 7. If you have installed a hard disk drive made by another company in your computer, it may need to be partitioned and formatted. If this is the case, see Appendix E for instructions. If it needs a low-level (physical) format, do that before you partition the disk. (See Appendix D for instructions.) Software Problems If you are having trouble with an application program, try the following solutions: 1. If the application program does not start, check that you are following the correct procedure for starting the program, and that it is installed correctly. If you have a hard disk and the program is stored in a directory on that drive, make sure you are logged onto or specifying the correct directory. If you don't have a hard disk, make sure you have inserted the application diskette in the top drive (drive A). Troubleshooting 6-11