HP 3310 User Guide - Page 104

Load originals and load paper To load postcards, Hagaki cards, or panorama photo paper in the main tray 1. Pull out the main tray past the first stop but do not remove it from the device. 2. Remove all paper from the main tray and slide the paper-width and paper-length guides to their outermost positions. 3. Insert the stack of cards into the far right side of the main tray with the short edge forward and the print side down. Slide the stack forward until it stops. 4. Slide the paper-length and paper-width guides inward against the stack of cards until they stop. Do not overload the main tray; make sure the stack of cards fits within the main tray and is no higher than the top of the paper-width guide. 5. Push the main tray back into the HP All-in-One. Load envelopes You can load one or more envelopes into the main tray of your HP All-in-One. Do not use shiny or embossed envelopes or envelopes that have clasps or windows. Note For specific details on how to format text for printing on envelopes, consult the help files in your word processing software. For best results, consider using a label for the return address on envelopes. To load envelopes 1. Pull out the main tray past the first stop but do not remove it from the device. 2. Remove all paper from the main tray. 3. Insert one or more envelopes into the far right side of the main tray with the envelope flaps up and to the left. Slide the stack of envelopes forward until it stops. Tip For more help on loading envelopes, refer to the diagram engraved in the base of the main tray. User Guide 101