HP 3310 User Guide - Page 84

Parameter, Description, AutoIP, Manual, Not Specified, IP Address - service manual

Page 84 highlights

(continued) Parameter IP Address Subnet Mask Default Gateway Configuration Source DNS server Description This address uniquely identifies the device on the network. IP addresses are assigned dynamically through DHCP or AutoIP. You can also set up a static IP address, though this is not recommended. Note Manually assigning an invalid IP address during installation will prevent your network components from seeing the HP All-in-One. A subnet is an IP address assigned by the installation software to make an additional network available as part of a larger network. Subnets are specified by a subnet mask. This mask determines which of the HP All-in-One IP address bits identify the network and subnet, and which bits identify the device itself. Note It is recommended that the HP All-in-One and the computers that use it all reside on the same subnet. A node on a network that serves as an entrance to another network. A node in this instance can be a computer or some other device. Note The address of the default gateway is assigned by the installation software. The protocol used to assign the IP address to the HP All-in-One: ● AutoIP: The installation software automatically determines the configuration parameters. ● DHCP: The configuration parameters are supplied by a dynamic host configuration protocol (DHCP) server on the network. On small networks, this could be a router. ● Manual: The configuration parameters are set manually, such as a static IP address. ● Not Specified: The mode used when the HP All-in-One is initializing. The IP address of the domain name service (DNS) for the network. When you use the web or send an e-mail message, you use a domain name to do it. For example, the URL http:// www.hp.com contains the domain name hp.com. The DNS on the Internet translates the domain name into an IP address. Devices use the IP addresses to refer to one another. ● IP Address: The IP address of the domain name server. ● Not Specified: The IP address is not specified, or the device is initializing. Note Check to see if a DNS IP address appears on the network configuration page. If no address is shown, obtain the DNS IP address from your Internet service provider (ISP). Network setup User Guide 81

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212

Parameter
Description
IP Address
This address uniquely identifies the device on the network. IP
addresses are assigned dynamically through DHCP or AutoIP.
You can also set up a static IP address, though this is not
recommended.
Note
Manually assigning an invalid IP address during
installation will prevent your network components from seeing the
HP All-in-One.
Subnet Mask
A subnet is an IP address assigned by the installation software to
make an additional network available as part of a larger network.
Subnets are specified by a subnet mask. This mask determines
which of the HP All-in-One IP address bits identify the network
and subnet, and which bits identify the device itself.
Note
It is recommended that the HP All-in-One and the
computers that use it all reside on the same subnet.
Default
Gateway
A node on a network that serves as an entrance to another
network. A node in this instance can be a computer or some other
device.
Note
The address of the default gateway is assigned by the
installation software.
Configuration
Source
The protocol used to assign the IP address to the HP All-in-One:
AutoIP
: The installation software automatically determines
the configuration parameters.
DHCP
: The configuration parameters are supplied by a
dynamic host configuration protocol (DHCP) server on the
network. On small networks, this could be a router.
Manual
: The configuration parameters are set manually, such
as a static IP address.
Not Specified
: The mode used when the HP All-in-One is
initializing.
DNS server
The IP address of the domain name service (DNS) for the
network. When you use the web or send an e-mail message, you
use a domain name to do it. For example, the URL http://
www.hp.com contains the domain name hp.com. The DNS on the
Internet translates the domain name into an IP address. Devices
use the IP addresses to refer to one another.
IP Address
: The IP address of the domain name server.
Not Specified
: The IP address is not specified, or the device
is initializing.
Note
Check to see if a DNS IP address appears on the network
configuration page. If no address is shown, obtain the DNS IP
address from your Internet service provider (ISP).
(continued)
User Guide
81
Network setup