HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 117
display saved-configuration - switch factory default
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. Description Use display default-configuration to display the factory defaults. The device is shipped with some basic settings called "factory defaults." These default settings make sure the device can start up and run normally when it has no configuration file or the configuration file is corrupted. Factory defaults vary with device models and might differ from the default settings of commands. Related commands: display current-configuration and display saved-configuration. Examples # Display the factory defaults of the device. The factory defaults vary with switch models. The output is not shown here. display default-configuration # domain default enable system # telnet server enable # undo ip redirects undo ip ttl-expires undo ip unreachables # vlan 1 # radius scheme system server-type extended primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain # domain system access-limit disable state active idle-cut disable self-service-url disable # ---- More ---- display saved-configuration Syntax display saved-configuration [ by-linenum ] [ | { begin | exclude | include } regular-expression ] View Any view Default level 2: System level 110