HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 55
telnet server ipv6 dscp, terminal type
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
telnet server ipv6 dscp Syntax telnet server ipv6 dscp dscp-value View undo telnet server ipv6 dscp System view Default level 2: System level Parameters dscp-value: Specifies a DSCP value in the range of 0 to 63. Description Use telnet server ipv6 dscp to set the DSCP value for IPv6 to use for outgoing Telnet packets on a Telnet server. Use undo telnet server ipv6 dscp to restore the default. By default, IPv6 uses the DSCP value 0 for outgoing Telnet packets on a Telnet server. Examples # Set the DSCP value for IPv6 to use for outgoing Telnet packets to 30 on a Telnet server. system-view [Sysname] telnet server ipv6 dscp 30 terminal type Syntax terminal type { ansi | vt100 } View undo terminal type User interface view Default level 2: System level Parameters ansi: Specifies the terminal display type as ANSI. vt100: Specifies the terminal display type as VT100. Description Use terminal type to configure the type of terminal display of the current user interface. Use undo terminal type to restore the default. By default, the terminal display type is ANSI. The device supports two types of terminal display: ANSI and VT100. HP recommends you to set the display type of both the device and the client to VT100. If the device and the client use different display 48