HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 79
open ipv6
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
View FTP client view Default level 3: Manage level Parameters server-address: IP address or host name of a remote FTP server. service-port: Port number of the remote FTP server, in the range of 0 to 65535. The default value is 21. Description Use open to log in to the IPv4 FTP server under FTP client view. At login, enter the username and password. If your input is correct, the login succeeds. If you have logged in to the IPv4 FTP server, you cannot use the open command to log in to another server. To do so, you must disconnect from the current server first. Related commands: close. Examples # In FTP client view, log in to the FTP server with the IP address of 192.168.1.50. ftp [ftp] open 192.168.1.50 Trying 192.168.1.50 ... Press CTRL+K to abort Connected to 192.168.1.50. 220 FTP service ready. User(192.168.1.50:(none)):aa 331 Password required for aa. Password: 230 User logged in. [ftp] open ipv6 Syntax View open ipv6 server-address [ service-port ] [ -i interface-type interface-number ] FTP client view Default level 3: Manage level Parameters server-address: IP address or host name of the remote FTP server. service-port: Port number of the remote FTP server, in the range of 0 to 65535. The default value is 21. -i interface-type interface-number: Specifies an output interface by its type and number. This parameter can be used only when the FTP server address is a link local address and the specified output interface 72