HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 51
telnet client dscp
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
View User view Default level 0: Visit level Parameters remote-host: IPv4 address or host name of a remote host, a case-insensitive string of 1 to 20 characters. service-port: TCP port number of the Telnet service on the remote host. It is in the range of 0 to 65535 and defaults to 23. vpn-instance vpn-instance-name: Specifies the MPLS L3VPN that the remote system belongs to, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. source: Specifies the source interface or source IPv4 address of Telnet packets. interface interface-type interface-number: Specifies the source interface. The source IPv4 address of the Telnet packets sent is the IPv4 address of the specified interface. interface-type interface-number represents the interface type and number. ip ip-address: Specifies the source IPv4 address of Telnet packets. Description Use telnet to Telnet to a remote host. To terminate the current Telnet connection, press Ctrl+K or use the quit command. The source IPv4 address or source interface specified by this command is applicable to the current Telnet connection only. Examples # Telnet to the remote host 1.1.1.2, specifying the source IP address of Telnet packets as 1.1.1.1. telnet 1.1.1.2 source ip 1.1.1.1 telnet client dscp Syntax telnet client dscp dscp-value View undo telnet client dscp System view Default level 2: System level Parameters dscp-value: Specifies a DSCP value in the range of 0 to 63. Description Use telnet client dscp to set the DSCP value for IPv4 to use for outgoing Telnet packets on a Telnet client. Use undo telnet client dscp to restore the default. By default, IPv4 uses the DSCP value 16 for outgoing Telnet packets on a Telnet client. 44