HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 73
ftp client dscp, ftp client ipv6 dscp
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
User(192.168.0.211:(none)):abc 331 Password required for abc Password: 230 User logged in. [ftp] ftp client dscp Syntax ftp client dscp dscp-value View undo ftp client dscp System view Default level 2: System level Parameters dscp-value: Specifies a DSCP value in the range of 0 to 63. Description Use ftp client dscp to set the DSCP value for IPv4 to use for outgoing FTP packets on an FTP client. Use undo ftp client dscp to restore the default. By default, IPv4 uses the DSCP value 0 for outgoing FTP packets on an FTP client. Examples # Set the DSCP value for IPv4 to use for outgoing FTP packets to 30 on an FTP client. system-view [Sysname] ftp client dscp 30 ftp client ipv6 dscp Syntax ftp client ipv6 dscp dscp-value View undo ftp client ipv6 dscp System view Default level 2: System level Parameters dscp-value: Specifies a DSCP value in the range of 0 to 63. Description Use ftp client ipv6 dscp to set the DSCP value for IPv6 to use for outgoing FTP packets on an FTP client. 66