HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 91

tftp ipv6

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

sent to a TFTP server. If the source interface has no primary IP address specified, no TFTP connection can be established. ip source-ip-address: Specifies the source IP address of packets sent to a TFTP server, which is one of the IP addresses configured on the device. Description Use tftp client source to specify the source IP address of packets sent to a TFTP server. Use undo tftp client source to restore the default. By default, the source IP address is the IP address of the output interface of the route to the server is used as the source IP address. If you use the tftp client source command to first configure a source interface and then a source IP address, the source IP address overwrites the source interface, and vice versa. If you first use the tftp client source command to specify a source IP address and then use the tftp command to specify another source IP address, the latter is used. The source IP address specified with the tftp client source command applies to all TFTP connections while the one specified with the tftp command applies to the current TFTP connection only. Related commands: display tftp client configuration. Examples # Specify the source IP address of packets sent to a TFTP server as 2.2.2.2. system-view [Sysname] tftp client source ip 2.2.2.2 # Specify the IP address of interface VLAN-interface 1 as the source IP address of packets sent to a TFTP server. system-view [Sysname] tftp client source interface vlan-interface 1 tftp ipv6 Syntax View tftp ipv6 tftp-ipv6-server [ -i interface-type interface-number ] { get | put } source-filename [ destination-filename ] User view Default level 3: Manage level Parameters tftp-ipv6-server: IPv6 address or host name of a TFTP server, a string of 1 to 46 characters. -i interface-type interface-number: Specifies an output interface by its type and number. This parameter can be used only when the TFTP server address is a link local address and the specified output interface has a link local address. For the configuration of a link local address, see IPv6 basics configuration in Layer 3-IP Services Configuration Guide. get: Downloads a file. 84

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
84
sent to a TFTP server. If the source interface has no primary IP address specified, no TFTP connection can
be established.
ip
source-ip-address
: Specifies the source IP address of packets sent to a TFTP server, which is one of the
IP addresses configured on the device.
Description
Use
tftp client source
to specify the source IP address of packets sent to a TFTP server.
Use
undo tftp client source
to restore the default.
By default, the source IP address is the IP address of the output interface of the route to the server is used
as the source IP address.
If you use the
tftp client source
command to first configure a source interface and then a source IP address,
the source IP address overwrites the source interface, and vice versa.
If you first use the
tftp client source
command to specify a source IP address and then use the
tftp
command to specify another source IP address, the latter is used.
The source IP address specified with the
tftp client source
command applies to all TFTP connections while
the one specified with the
tftp
command applies to the current TFTP connection only.
Related commands:
display tftp client configuration
.
Examples
# Specify the source IP address of packets sent to a TFTP server as 2.2.2.2.
<Sysname> system-view
[Sysname] tftp client source ip 2.2.2.2
# Specify the IP address of interface VLAN-interface 1 as the source IP address of packets sent to a TFTP
server.
<Sysname> system-view
[Sysname] tftp client source interface vlan-interface 1
tftp ipv6
Syntax
tftp ipv6
tftp-ipv6-server
[
-i
interface-type interface-number
] {
get
|
put
}
source-filename
[
destination-filename
]
View
User view
Default level
3: Manage level
Parameters
tftp-ipv6-server
: IPv6 address or host name of a TFTP server, a string of 1 to 46 characters.
-i
interface-type interface-number
: Specifies an output interface by its type and number. This parameter
can be used only when the TFTP server address is a link local address and the specified output interface
has a link local address. For the configuration of a link local address, see IPv6 basics configuration in
Layer 3—IP Services Configuration Guide
.
get
: Downloads a file.