HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 25
command authorization, databits
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
command authorization Syntax command authorization View undo command authorization User interface view Default level 3: Manage level Parameters None Description Use command authorization to enable command authorization. Use undo command authorization to restore the default. By default, command authorization is disabled. Logged-in users can execute commands without authorization. With command authorization enabled, users can perform only commands authorized by the server. Examples # Enable command accounting for VTY 0 so users logging in from VTY 0 can perform only the commands authorized by the HWTACACS server. system-view [Sysname] user-interface vty 0 [Sysname-ui-vty0] command authorization databits Syntax databits { 7 | 8 } View undo databits User interface view Default level 2: System level Parameters 7: Sets 7 data bits for each character. 8: Sets 8 data bits for each character. Description Use databits to set data bits for each character. Use undo databits to restore the default. 18