HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 39

ip http port

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Description Use ip http enable to enable the HTTP service. Use undo ip http enable to disable the HTTP service. The device can act as the HTTP server that can be accessed only after the HTTP service is enabled. By default, the HTTP service is disabled. Related commands: display ip http. Examples # Enable the HTTP service. system-view [Sysname] ip http enable # Disable the HTTP service. system-view [Sysname] undo ip http enable ip http port Syntax ip http port port-number View undo ip http port System view Default level 3: Manage level Parameters port-number: Port number of the HTTP service, in the range of 1 to 65535. Description Use ip http port to configure the port number of the HTTP service. Use undo ip http port to restore the default. By default, the port number of the HTTP service is 80. Verify that the port number is not used by another service, because this command does not check for conflicts with configured port numbers. Related commands: display ip http. Examples # Configure the port number of the HTTP service as 8080. system-view [Sysname] ip http port 8080 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
32
Description
Use
ip http enable
to enable the HTTP service.
Use
undo ip http enable
to disable the HTTP service.
The device can act as the HTTP server that can be accessed only after the HTTP service is enabled.
By default, the HTTP service is disabled.
Related commands:
display ip http
.
Examples
# Enable the HTTP service.
<Sysname> system-view
[Sysname] ip http enable
# Disable the HTTP service.
<Sysname> system-view
[Sysname] undo ip http enable
ip http port
Syntax
ip http port
port-number
undo ip http port
View
System view
Default level
3: Manage level
Parameters
port-number
: Port number of the HTTP service, in the range of 1 to 65535.
Description
Use
ip http port
to configure the port number of the HTTP service.
Use
undo ip http port
to restore the default.
By default, the port number of the HTTP service is 80.
Verify that the port number is not used by another service, because this command does not check for
conflicts with configured port numbers.
Related commands:
display ip http
.
Examples
# Configure the port number of the HTTP service as 8080.
<Sysname> system-view
[Sysname] ip http port 8080