HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 75
ftp ipv6, get
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
[Sysname] ftp client source interface vlan-interface 1 ftp ipv6 Syntax View ftp ipv6 [ server-address [ service-port ] [ source ipv6 source-ipv6-address ] [ -i interface-type interface-number ] ] User view Default level 3: Manage level Parameters server-address: IP address or host name of the remote FTP server. service-port: TCP port number of the FTP server, in the range of 0 to 65535. The default value is 21. source ipv6 source-ipv6-address: Specifies a source IPv6 address for transmitted FTP packets. This address must be an IPv6 address that has been configured on the device. -i interface-type interface-number: Specifies an output interface by its type and number. This parameter can be used only when the FTP server address is a link local address and the specified output interface has a link local address. For the configuration of link local addresses, see Layer 3-IP Services Configuration Guide. Description Use ftp ipv6 to log in to the FTP server and enter FTP client view. This command applies to IPv6 networks only. If you use this command without specifying any parameters, you will simply enter the FTP client view without logging in to an FTP server. If you specify the parameters, enter the username and password for accessing the FTP server. Examples # Log in to the FTP server with IPv6 address 3000::200. ftp ipv6 3000::200 Trying 3000::200 ... Press CTRL+K to abort Connected to 3000::200. 220 Welcome! User(3000::200:(none)): MY_NAME 331 Please specify the password. Password: 230 Login successful. [ftp] get Syntax get remotefile [ localfile ] 68