HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 90
tftp client ipv6 dscp, tftp client source
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Use undo tftp client dscp to restore the default. By default, IPv4 uses the DSCP value 0 for outgoing TFTP packets on a TFTP client. Examples # Set the DSCP value for IPv4 to use for outgoing TFTP packets to 30 on a TFTP client. system-view [Sysname] tftp client dscp 30 tftp client ipv6 dscp Syntax tftp client ipv6 dscp dscp-value View undo tftp client ipv6 dscp System view Default level 2: System level Parameters dscp-value: Specifies a DSCP value in the range of 0 to 63. Description Use tftp client ipv6 dscp to set the DSCP value for IPv6 to use for outgoing TFTP packets on a TFTP client. Use undo tftp client ipv6 dscp to restore the default. By default, IPv6 uses the DSCP value 0 for outgoing TFTP packets on a TFTP client. Examples # Set the DSCP value for IPv6 to use for outgoing TFTP packets to 30 on a TFTP client. system-view [Sysname] tftp client ipv6 dscp 30 tftp client source Syntax tftp client source { interface interface-type interface-number | ip source-ip-address } View undo tftp client source System view Default level 2: System level Parameters interface interface-type interface-number: Specifies the source interface for establishing TFTP connections. The primary IP address of the source interface is used as the source IP address of packets 83