HP 6125G HP 6125G & 6125G/XG Blade Switches Fundamentals Command Refer - Page 52
telnet client ipv6 dscp, telnet client source
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Examples # Set the DSCP value for IPv4 to use for outgoing Telnet packets to 30 on a Telnet client. system-view [Sysname] telnet client dscp 30 telnet client ipv6 dscp Syntax telnet client ipv6 dscp dscp-value View undo telnet client ipv6 dscp System view Default level 2: System level Parameters dscp-value: Specifies a DSCP value in the range of 0 to 63. Description Use telnet client ipv6 dscp to set the DSCP value for IPv6 to use for outgoing Telnet packets on a Telnet client. Use undo telnet client ipv6 dscp to restore the default. By default, IPv6 uses the DSCP value 0 for outgoing Telnet packets on a Telnet client. Examples # Set the DSCP value for IPv6 to use for outgoing Telnet packets to 30 on a Telnet client. system-view [Sysname] telnet client ipv6 dscp 30 telnet client source Syntax telnet client source { interface interface-type interface-number | ip ip-address } View undo telnet client source System view Default level 2: System level Parameters interface interface-type interface-number: Specifies the source interface. The source IPv4 address of the Telnet packets sent is the IPv4 address of the specified interface. interface-type interface-number represents the interface type and number. ip ip-address: Specifies the source IPv4 address of Telnet packets. 45