HP Designjet L26100 HP Designjet L26500/L26100 Printer Series - User's Guide - Page 19
Basic setup options, Printer setup options, Change the language of the front panel
View all HP Designjet L26100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3 Basic setup options Printer setup options Change the language of the front panel Two methods are available to change the language that is used for the front-panel menus and messages. ● If you can understand the current front panel language, go to the front panel and select the icon, then select Front panel options > Select language. ● If you cannot understand the current front panel language, start with the printer powered off. At the front panel, press the OK button and hold it down. While holding down the OK button, press the Power button and hold it down. Continue to hold down both buttons until the green light on the left side of the front panel starts flashing, then release both buttons. You can expect a delay of about one second. If the green light starts flashing without any delay, you may need to start again. Whichever method you used, the language selection menu should now appear on the front panel. Basic setup options Highlight your preferred language, then press the OK button. View or set the date and time To view or set the printer's date and time, go to the front panel and select the panel options > Date and time options. icon, then Front Set altitude If your printer is operating at a significant altitude above sea level, go to the front panel and select the icon, then Select altitude, to tell the printer its operating altitude. ENWW Printer setup options 15