HP Designjet L26100 HP Designjet L26500/L26100 Printer Series - User's Guide - Page 35

If the substrate you are using tends to curl, keep feeding the substrate until the edge is out

Get HP Designjet L26100 PDF manuals and user guides View all HP Designjet L26100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

3. Carefully insert the leading edge of the substrate above the black-ribbed roller, making sure the substrate remains taut during the process. Avoid rewinding the substrate manually, unless the printer asks you to do so. The front panel displays the following. 4. Continue to feed the substrate until it reaches the printing platen. Open the window to help pull the substrate through. WARNING! Do not touch the printer's drying enclosure. Even after you have opened the window latch, which disconnects the power to the drying and curing modules, the internal surfaces could be hot. TIP: If the substrate you are using tends to curl, keep feeding the substrate until the edge is out of the printer. You are also recommended to use the take-up reel, or to disable the cutter from the front panel if not using the take-up reel. 5. Pull down the substrate-adjustment lever as far as it will go. Handle the substrate ENWW Load a roll into the printer (manually) 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
3.
Carefully insert the leading edge of the substrate above the black-ribbed roller, making sure the
substrate remains taut during the process. Avoid rewinding the substrate manually, unless the
printer asks you to do so. The front panel displays the following.
4.
Continue to feed the substrate until it reaches the printing platen. Open the window to help pull
the substrate through.
WARNING!
Do not touch the printer's drying enclosure. Even after you have opened the
window latch, which disconnects the power to the drying and curing modules, the internal
surfaces could be hot.
TIP:
If the substrate you are using tends to curl, keep feeding the substrate until the edge is out of
the printer. You are also recommended to use the take-up reel, or to disable the cutter from the
front panel if not using the take-up reel.
5.
Pull down the substrate-adjustment lever as far as it will go.
ENWW
Load a roll into the printer (manually)
31
Handle the substrate