HP Scitex LX600 HP Scitex LX Printer Family - User's guide - Page 24
Tips for specific substrates, liner, HP Heavy Textile Banner
View all HP Scitex LX600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
NOTE: Printing on porous types of substrate with water based inks can result in an increased amount of water vapor being generated. You can find further information on the Web: ● The specifications, finishing, processing and warranty information for each individual HP substrate are available from http://www.hp.com/go/designjet/supplies/latex/. ● HP Image Permanence information is available from http://www.hp.com/go/supplies/ printpermanence/. ● HP offers recyclable substrates such as HP HDPE Reinforced Banner, HP Wrinkle-free Flag with liner, HP Heavy Textile Banner, HP Photo-realistic Poster Paper and HP DuPont™ Tyvek® Banner. Recycling opportunities for these products may not exist in all areas. You should consult local recycling resources about recycling these products. For recycling in the USA, please go to the HP recycling services site, http://www.hp.com/go/recycleLFmedia/. Tips for specific substrates Substrate Printing side HP Durable Frontlit Scrim Banner Inside (smooth side) HP Outdoor Frontlit Scrim Banner Inside (smooth side) HP HDPE Reinforced Banner Inside (matte side) HP Permanent Gloss Adhesive Vinyl Outside (glossy side) HP Permanent Matte Adhesive Vinyl Outside HP Air Release Adhesive Gloss Cast Vinyl Outside HP One View Perforated Adhesive Window Vinyl Outside HP PVC-free Gloss Adhesive Outside Film HP Wrinkle-free Flag with liner Outside (fabric side) HP Heavy Textile Banner HP Light Textile Display Banner HP Blue Black Billboard Paper HP Photo-realistic Poster Paper Inside Both sides; inside recommended Outside (white side) Both sides Printing tips Use the right settings to avoid printing issues described in Table 3-1 Substrate preset settings on page 58. Use the right settings to avoid printing issues described in Table 3-1 Substrate preset settings on page 58. This substrate is sensitive to high temperatures. Printing and curing temperatures are set to minimize material deformation. If the ambient temperature is high and you see excessive deformation of the substrate, raise the carriage beam to its highest position. Recyclable (see above). Use the right settings to avoid printing issues described in Table 3-1 Substrate preset settings on page 58. Use the right settings to avoid printing issues described in Table 3-1 Substrate preset settings on page 58. Take care to load the substrate and select settings correctly to avoid liner delamination while printing. Recyclable (see above). Recyclable (see above). You are recommended to clean the platen after printing 50 m (164 ft) of substrate. Use the right settings to avoid printing issues described in Table 3-1 Substrate preset settings on page 58. This substrate is sensitive to high temperatures. Printing and curing temperatures are set to avoid material deformation. This substrate is recyclable: you can dispose of it together with cardboard. 20 Chapter 3 Handle the substrate ENWW