HP Scitex LX600 HP Scitex LX Printer Family - User's guide - Page 30

Kit components, Install the kit, WARNING, CAUTION

Get HP Scitex LX600 PDF manuals and user guides View all HP Scitex LX600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Kit components 1. Ink collector container 2. 8 ink collectors with replaceable foams 3. Input diverter roller 4. Output diverter roller Install the kit The ink collector kit must be installed before printing on porous substrates. WARNING! Do not touch the internal enclosures of the printer's drying and curing modules while installing the ink collector kit: they can be hot enough to cause burns. CAUTION: Do not install the ink collector kit without declaring the configuration to the HP Internal Print Server. 1. If any substrate is loaded, unload it. 2. Raise the carriage beam to its highest position. 3. Remove the edge holders from the substrate path. 4. If necessary, clean the platen and the curing plates with a cloth dampened with an all-purpose cleaner. 5. Open the ink collector container and check that the ink collector foams are dry. 6. Follow the instructions in the HP Internal Print Server to complete the installation. If you need further information, read the steps below. CAUTION: If you install the kit incorrectly, some parts of the printer may be damaged. 26 Chapter 3 Handle the substrate ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
Kit components
1.
Ink collector container
2.
8 ink collectors with replaceable foams
3.
Input diverter roller
4.
Output diverter roller
Install the kit
The ink collector kit must be installed before printing on porous substrates.
WARNING!
Do not touch the internal enclosures of the printer's drying and curing modules while
installing the ink collector kit: they can be hot enough to cause burns.
CAUTION:
Do not install the ink collector kit without declaring the configuration to the HP Internal Print
Server.
1.
If any substrate is loaded, unload it.
2.
Raise the carriage beam to its highest position.
3.
Remove the edge holders from the substrate path.
4.
If necessary, clean the platen and the curing plates with a cloth dampened with an all-purpose
cleaner.
5.
Open the ink collector container and check that the ink collector foams are dry.
6.
Follow the instructions in the HP Internal Print Server to complete the installation. If you need further
information, read the steps below.
CAUTION:
If you install the kit incorrectly, some parts of the printer may be damaged.
26
Chapter 3
Handle the substrate
ENWW