HP StorageWorks 1606 Brocade Web Tools Administrator's Guide v6.3.0 (53-100134 - Page 215

Port configuration 12 11. Click Close on the Port Group Configuration dialog box. Editing or Viewing port groups Use the following procedure to edit port groups. 1. Click a port in the Switch View to open the Port Administration window. 2. Click Configure N_Port Groups. 3. On Port Group Configuration dialog box, select the group that you want to edit and then click Edit/View. The Edit/View Port Group window displays. FIGURE 97 Edit/View Port Group 4. Edit the name of the port group in the Port Group Name field. 5. Select the Login Balancing check box and the Fabric Name Monitoring check box if you want to enable these features. Clear the check boxes to disable these features. On selecting Login Balancing check box, F Port Auto Rebalancing and N-Port Auto Rebalancing check boxes and Manual Balancing button gets enabled. 6. Click Failover Enable. A confirmation dialog box displays. Click Yes to enable failover to all the ports in the port group or click No if you do not want to enable failover. 7. Click Failover Disable. A confirmation dialog box displays. Click Yes to disable failover to all the ports in the port group or click No if you do want to disable failover. Web Tools Administrator's Guide 183 53-1001343-01