HP StorageWorks 1606 Brocade Web Tools Administrator's Guide v6.3.0 (53-100134 - Page 298

17 IPSec over management ports Enabling IPSec Ethernet IPSec policies can be configured only after enabling IPSec by clicking the Enable button below the Ethernet IPSec policies table (Figure 139). Establishing an IKE policy When you establish an IKE policy, you identify a set of algorithms and authentication rules and parameters to use in a key exchange. 1. Select the IKE tab on the IPSec Policies window for Ethernet IPSec. The Add IKE Policy dialog box is displayed (Figure 140). FIGURE 140 Add IKE Policy for management port 2. Type an IKE Policy Name. 3. Type the IP address of the authentication partner in Peer IP Address. 4. Type the switch's local identifier in the Local Identifier field. This is normally the IP address in IPv4 or IPv6 format, but it may also be a DNS name. 266 Web Tools Administrator's Guide 53-1001343-01