HP StorageWorks 1606 Brocade Web Tools Administrator's Guide v6.3.0 (53-100134 - Page 285

Active Directory service management 17 Modifying the RADIUS Server Order The RADIUS servers are contacted in the order they are listed, starting from the top of the list and moving to the bottom. 1. Open the Switch Administration window as described on page 41. 2. Click the AAA Service tab. 3. Click a RADIUS server from the RADIUS Configuration list. 4. Click the up and down arrows to rearrange the order of the RADIUS servers. 5. Click Apply. Removing a RADIUS Server Use the following procedure to remove a RADIUS server. 1. Open the Switch Administration window as described on page 41. 2. Click the AAA Service tab. 3. Click a RADIUS server from the RADIUS Configuration list. 4. Click Remove. If there is no RADIUS server configured, the Remove button is disabled. You cannot remove the only RADIUS server if the RADIUS service is the primary AAA service. The RADIUS server is not deleted until you apply the changes from the AAA Services tab. 5. Click Apply in the AAA Services tab. A confirmation displays, warning you that you are about to remove the selected RADIUS server. 6. Click Yes in the confirmation. Active Directory service management Active Directory is the directory server that holds all the user profiles. Active Directory provides user authentication and authorization using LDAP as authentication protocol. Active Directory provides better security while using remote authentication mechanism. You can add, remove, and modify settings of Active Directory Server. Enabling Active Directory service For adding a new Active Directory server, you must provide the server IP address, port number, secret string, timeout value, and LDAP as the authentication protocol. The server IP address may be in either IPv4 or IPv6 format. Select Active Directory as the server type; the dialog box shows only LDAP as the authentication protocol. 1. Open the Switch Administration window as described on page 41. 2. Click the AAA Service tab. 3. To enable Active Directory service, select Active Directory from the Primary AAA Service menu. Web Tools Administrator's Guide 253 53-1001343-01