HP StorageWorks 1606 Brocade Web Tools Administrator's Guide v6.3.0 (53-100134 - Page 345

Configuring FCoE login groups 19 The New Login Group dialog box is displayed (Figure 172). FIGURE 172 New Login Group dialog box 4. Type a name for the login group in the Login Group Name field. 5. Select the switch WWN, The choices are Self, which is the WWN of the switch you are logged into, or Other Switch WWN. If you choose Other Switch WWN, you must type the WWN of that switch in the provided field. 6. Under Login Member Configuration, click either Allow All Members, or Allow Specific Member. • If you choose Allow All Members, all devices attached to FCoE ports are allowed to log in to the switch. • If you choose Allow Specific Member, you can control which devices can log in, using Member Type, Member PWWN/MAC, and the Add and Remove buttons, as described below. a. Select Model2 as Member Type for an 8000 switch and proceed to step c. b. Select Model3 as Member Type and enter values in the Slot # and Fcoe Trunk Index fields. c. Type the port WWN in hexadecimal format in the Member PWWN/MAC field, and click Add. The WWN is displayed under Allowed Login Members. If you decide a member should not be on the list, highlight the entry and click Remove. 7. Click OK. Web Tools Administrator's Guide 313 53-1001343-01