HP StorageWorks 1606 Brocade Web Tools Administrator's Guide v6.3.0 (53-100134 - Page 242

15 Setting up iSCSI Target Gateway Services Configuring the IP route is optional because when an IP address is set up, a route is automatically set up as well. 1. Open iSCSI Target Gateway Admin as described on page 206. 2. Select the iSCSI Port tab. 3. In the left pane, select the GbE port to use. 4. Select the IP Interface subtab and click Add. 5. Enter the IP address and subnet mask. 6. Enter the MTU size or accept the default MTU size, and click Add. Editing an IP Address Use the following procedure to edit an IP address. 1. Launch the iSCSI Target Gateway Admin module as described on page 206. 2. Select the iSCSI Port tab. 3. From the left pane, select the GbE port to use. 4. Select the IP Interface subtab and select the item on the tab. 5. Click Edit. 6. Click OK when you receive the Warning dialog box. FIGURE 109 Edit IP Interface dialog box 7. Enter the subnet mask. 8. Enter the MTU size or accept the default MTU size, and click OK. NOTE To change the IP address, delete the current IP address and recreate it. You will not be allowed to create an additional IP address for this interface, because there can be only one IP address per interface. 210 Web Tools Administrator's Guide 53-1001343-01