HP StorageWorks 1606 Brocade Web Tools Administrator's Guide v6.3.0 (53-100134 - Page 308

17 Establishing authentication policies for HBAs 5. Select the policy or policies you want to delete. 6. Select Delete. 7. The policy is deleted from the SA database (SADB), and is removed from the list. Establishing authentication policies for HBAs To establish and enable authentication policies for HBAs as the log in to a fabric, do the following. 1. Open the Switch Administration window. 2. Select Show Advanced Mode. 3. Select the Security Policies tab. 4. Select Authentication under Security Policies. The Authentication Policy Settings screen is displayed (Figure 148). FIGURE 148 Device Authentication Policy Mode Under Configure Authentication Policy, do the following. 5. Choose the Authentication Type. The choices are FCAP, DHCHAP, or both. 6. Choose the Switch Authentication Policy Mode. The choices are Passive, Active, On, or Off. 7. Choose the Hash Type used. The choices are SHA1, MD5, or both. 8. Choose the DH-Group Type. The choices are 0 (no DH authentication), 1 (1024 bit), 2 (1280 bit), 3 (1536 bit), or 4 (2048 bit). 9. Use the Device Authentication Policy Mode selector to set the desired mode. The choices are On, Off, or Passive. 276 Web Tools Administrator's Guide 53-1001343-01