HP StorageWorks 1606 Brocade Web Tools Administrator's Guide v6.3.0 (53-100134 - Page 343

Configuring VLANs 19 The VLAN Configuration dialog box is displayed (Figure 170). FIGURE 170 VLAN Configuration dialog box 4. Specify a VLAN ID. The format is VLAN. In this Fabric OS release, no bridge instances are supported, so the bridge number is always 0, and the value under Bridge is statically defined as VLAN0. The is an integer from 1 to 3583, which must be typed in the ID field. 5. Select the Native check box. 6. Under the Selection List, click the plus sign next to the Interface and LAG folders, and select individual interfaces and LAGs you want to associate with the VLAN ID. 7. Click Add to move the interfaces or LAGs to the Selected List. Note the reminder that interfaces must be configured as L2, and that the interfaces or LAGs must be in Trunk mode to be associated with multiple VLANs, Access mode interfaces can be associated with only one VLAN, and the Converged mode interface can be Native in one VLAN and it could be non-native type in more than one VLAN. 8. Click OK. 9. Repeat the procedure for additional VLANs. 10. To edit VLAN, select the detail from the table in the VLAN tab (Figure 170) and click Edit. The FCoE check box is selected by default. Click OK to enable FCoE. Clear the check box to disable FCoE. Web Tools Administrator's Guide 311 53-1001343-01