HP StorageWorks 1606 Brocade Web Tools Administrator's Guide v6.3.0 (53-100134 - Page 297

IPSec over management ports 17 IPSec over management ports IPSec can be applied to the management port on a switch or a CP blade to establish a secure connection between a PC or workstation and Web Tools. The connection can be used as a virtual private network (VPN) interface to Web Tools. At a high level, the steps to take are as follows: • Access the Ethernet IPSec Policies dialog box. • Enable IPSec. • Create an IKE policy for authentication. • Create an security association (SA). • Create an SA proposal. • Add a IPSec Transform policy, referencing the IKE policy and the SA proposal. • Add an IPSec selector that allows you to apply a Transform policy to a specific IP flow. Accessing the Ethernet IPSec Policies dialog box Use the following procedure to access the Ethernet IPSec Policies dialog box. 1. Open the Switch Administration window. 2. Select Show Advanced Mode. 3. Select the Security Policies tab. 4. Under Security Policies, select Ethernet IPSec. The Ethernet IPSec Policies screen is displayed (Figure 139). FIGURE 139 IPSec Policies (Ethernet management port) Web Tools Administrator's Guide 265 53-1001343-01