HP StorageWorks 1606 Brocade Web Tools Administrator's Guide v6.3.0 (53-100134 - Page 280

17 SNMP configuration FIGURE 130 SNMP tab 3. Select a trap level for a recipient from the corresponding Trap Level menu in the SNMPv1 and SNMPv3 sections. The level you select identifies the minimum event level that will prompt a trap. NOTE Adding or editing the user name can be done only through the CLI and by selecting a user name from the User Name menu in the SNMPv3 section. 4. Click Apply. Changing the systemGroup configuration parameters Use the following procedure to change the systemGroup configuration parameters. 1. Open the Switch Administration window as described on page 41. 2. Click the SNMP tab (Figure 130). 3. Type a contact name, description, and location in the SNMP Information section. 4. Optional: Select the Enable Authentication Trap check box to allow authentication traps to be sent to the reception IP address. 5. Click Apply. 248 Web Tools Administrator's Guide 53-1001343-01