Panasonic KXFPG381 KXFPG381 User Guide - Page 51
-way radio, communication when the, system has additional, handsets, 18.1 To turn the 2-way radio
View all Panasonic KXFPG381 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Note: L If the room monitor feature of the destination unit is OFF, "DENIED" will be displayed and busy tone will sound. 3.18 2-way radio communication (when the system has additional handsets) If you purchase additional handsets (page 9), you can use two handsets in 2-way radio mode, which allows the two handsets to communicate with each other completely independent of the base unit. To use this feature, this 2-way radio mode must be turned ON for both handsets. Once the mode is ON, the handset can be used only to talk in 2-way radio mode, and the following features cannot be used: - Making/answering external and internal calls - Searching caller information or the directory - Programming - Accessing mailboxes to listen to messages - Receiving Caller ID information After using 2-way radio mode, remember to turn the mode OFF, otherwise battery life (page 20) will be shortened. L Keep the front cover page open for button locations. 3.18.1 To turn the 2-way radio mode ON Make sure the handset is not being used. 1 Press {CONF/FUNCTION}. 2 Scroll to "2Way radio mode" by pressing {v} or {e}, then press {>}. 3 Press {v} or {e} repeatedly to select "On". 4 Press the right soft key ({SAVE}). L The display will show "2Way radio mode". To turn the mode OFF Place the handset on the charger. L "2Way radio mode" will disappear and the mode will turn OFF. L You can also turn OFF the mode as follows: 1. Press {CONF/FUNCTION}. 3. Telephone 2. Press {v} or {e} repeatedly to select "Off". 3. Press the right soft key ({SAVE}). 3.18.2 To call another handset Make sure the mode is ON on both your handset and the destination handset, and the displays show "2Way radio mode". 1 Press {TALK}, {SP-PHONE} or {INTERCOM/TRANSFER}. 2 Enter an extension number using a dialing button ({1} to {8}). L The called handset will ring for 1 minute. L To stop calling, press {OFF}. 3 When the called party answers, talk into the handset. L You can switch to the receiver or the speaker by pressing {TALK} or {SPPHONE}. 4 To end the conversation, press {OFF}. To adjust the ringer volume for 2-way radio mode (high/medium/low/off) While the handset is not in use, press {v} or {e}. L To turn the ringer OFF, press {v} repeatedly until "Off" is displayed. "Ringer off" will be displayed. 3.18.3 To answer a call 1 Press {TALK}, {SP-PHONE} or {INTERCOM/TRANSFER} to answer the call. 2 To end the conversation, press {OFF}. 49