Panasonic KXFPG381 KXFPG381 User Guide - Page 71

"ERROR" (default): A sending report will be printed only when fax transmission fails. "ON": A sending report will be printed out after every transmission. "OFF": Sending reports will not be printed out. Code #06: Changing the ring setting in FAX ONLY mode FAX RING COUNT RINGS=3 [±] To change the number of rings before the unit answers a call in FAX ONLY mode. You can select "1", "2", "3" (default) or "4". Code #06: Changing the ring setting in TAM/FAX mode TAM RING COUNT RINGS=2 [±] To change the number of rings before the unit answers a call in TAM/FAX mode. You can select "2" (default), "3", "4", "5", "6", "7" or "TOLL SAVER". See page 55 for details. Note: L You can also program this feature with the handset (page 75). Code #10: Changing the maximum recording time for each incoming message RECORDING TIME MODE=3 MIN [±] "1 MIN", "2 MIN" or "3 MIN" (default): 1 minute to 3 minutes. "GREETING ONLY": Only plays your greeting message. Note: L If you select "GREETING ONLY", the unit will answer a call with the greeting message, and then hang up. The unit will not record any incoming messages. L You can also program this feature with the handset (page 75). Code #11: Setting the remote operation ID REMOTE TAM ID ID=11 1. Press {MENU}. 2. Press {#}, then {1}{1}. 3. Enter any 2-digit number (00-99). L The default ID is "11". 4. Press {SET}. 5. Press {MENU}. 8. Programmable Features Note: L You can also program this feature with the handset (page 76). Code #13: Setting the dialing mode DIALING MODE MODE=TONE [±] If you cannot make calls, change this setting depending on your telephone line service. "TONE" (default): For tone dial service. "PULSE": For rotary pulse dial service. Note: L You can also program this feature with the handset (page 74). Code #16: Setting the recording paper size PAPER SIZE =LETTER [±] "LETTER" (default): Letter or legal size paper. "A4": A4 size paper. Code #17: Setting the ringer tone for external calls RINGER TONE MODE=1 [±] To set the base unit ringer tone from one of 6 patterns for external calls. You can select "1" (default), "2", "3", "4", "5" or "6". Note: L To set the handset ringer tone, see page 74. 8.3 Advanced features Code #22: Setting the journal report to print automatically AUTO JOURNAL MODE=ON [±] "ON" (default): The unit will print a journal report automatically after every 30 new fax communications (page 51). "OFF": The unit will not print a journal report, but will keep a record of the last 30 fax communications. Code #23: Sending documents overseas OVERSEAS MODE MODE=ERROR [±] If you have difficulty sending an overseas fax, activate this feature before starting transmission. "NEXT FAX": This setting is effective only for the next attempted fax transmission. After 69