Panasonic KXFPG381 KXFPG381 User Guide - Page 72
Programmable Features, Code #31: Activating the Distinctive Ring
View all Panasonic KXFPG381 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
8. Programmable Features transmission, the unit will return to the previous setting. "ERROR" (default): When the previous fax transmission fails and you wish to re-send the document automatically. "OFF": Deactivates this feature. Note: L This feature is not available for broadcast transmission. L The calling charge may be higher as the transmission speed is slowed down. Code #25: Sending a fax at a specific time DELAYED SEND MODE=OFF [±] This feature allows you to take advantage of lowcost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time. To send a document: 1. Insert the document. 2. Press {MENU}. 3. Press {#} then {2}{5}. 4. Press {A} or {B} repeatedly to select "ON". 5. Press {SET}. 6. Enter the fax number. 7. Press {SET}. 8. Enter the transmission start time. L Press {*} repeatedly to select "AM" or "PM". 9. Press {SET}. 10. Press {MENU}. Note: L To cancel after programming, press {STOP} then {SET}. Code #26: Setting the Caller ID list to print automatically AUTO CALL. LIST MODE=OFF [±] "ON": The Caller ID list will be printed automatically each time the base unit logs 50 different callers (page 40). "OFF" (default): The Caller ID list will not be printed, but the unit will keep a record of the information for the last 50 different callers. Code #31: Activating the Distinctive Ring feature DISTINCTIVE RING MODE=OFF [±] See page 56 for details. 70 Code #32: Setting the ring pattern for fax (Distinctive Ring feature) FAX RING PATTERN RING=B-D [±] See page 57 for details. Code #34: Setting the quick scan QUICK SCAN MODE=OFF [±] This feature is helpful when you want to remove the document for other uses, because the unit will release the document before sending or copying. "ON": The unit will scan the document and store it into memory first, then the unit will start sending or copying. "OFF" (default): Deactivates this feature. Note: L If the document exceeds the memory capacity, sending of the whole document or copying of the exceeded document will be canceled and this feature will be turned OFF automatically. Code #36: Receiving oversized documents RCV REDUCTION MODE=92% [±] If the size of the document sent by the other party is as large as or larger than the recording paper, the unit can reduce the document and print it. Select the desired reduction rate. Setting Recording paper size 100% 92% (default) 86% 72% Legal A4 Letter Legal A4 Letter Letter A4 Original document size Letter, A4 Letter Letter Legal A4 A4 Legal Legal Code #39: Changing the base unit display contrast LCD CONTRAST MODE=NORMAL [±] "NORMAL" (default): For normal contrast.