Ricoh Aficio MP 2500 Network Guide - Page 116
Connected DHCP Server<DHCP server ad, Change IP address from DHCP Server.
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Monitoring and Configuring the Printer Message Problem and solutions Attach FileServer= Connection to the file server as the nearest server has been established. Attach to print queue (In the print server mode) Attached to the print queue. authenticating 2 authentication mode mismatch The computer is performing WPA authentication through the access point. The authentication modes of the computer and access point do not match. Authentication mode mismatch< SSID > Authentication mode is different to the AP. The required SSID is the SSID of the access point connected to when in infrastructure mode. btd is disabled. Communication via Bluetooth is unavailable because btd is disabled in the security mode. Enable the btd in the security mode. cipher suite mismatch The cipher suite (TKIP/AES/WEP) of the computer and that of the access point do not match. centrod is disabled. Communication via parallel connections unavailable because centrod is disabled in the security mode. Enable centrod in the security mode. Cannot create service connection (In the remote printer mode) Connection to the file server has not been established. The number of file server users may have exceeded the maximum capacity of the file server. Cannot find rprinter (/) The printer with the number displayed on the print server does not exist. Make sure that the printer number is registered on the print server. Change IP address from DHCP Server. The IP address changes when DHCP lease is renewed. To always assign the same IP address, set a static IP address to the DHCP server. Client password rejected The client's password was rejected. Check the client password. Client tls certificate rejected The client's TLS certificate was rejected. Check the certificate. Connected DHCP Server(). the DHCP server. Could not attach to File Server (In the remote printer mode) Connection to the file server has not been established. The file server has refused the connection. Check the file server configuration. 108