Ricoh Aficio MP 2500 Network Guide - Page 87
snmp, msh> snmp, msh> snmp number name community_name, msh> snmp number clear name
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Remote Maintenance by telnet snmp Use the "snmp" command to display and edit SNMP configuration settings such as the community name. ❖ View settings msh> snmp • Default access settings 1 is as follows: 2 Community name: public IPv4 address: 0.0.0.0 IPv6 address::: IPX address: 00000000:000000000000 Access type: read-only Effective Protocol: IPv4/IPv6/IPX • Default access settings 2 is as follows: Community name:admin IPv4 address: 0.0.0.0 IPv6 address::: IPX address: 00000000:000000000000 Access type: read-write Effective Protocol: Pv4/IPv6/IPX • If "-p" is added, you can view settings one by one. • To display the current community, specify its registration number. ❖ Display msh> snmp ? ❖ Community name configuration msh> snmp "number" name "community_name" • You can configure ten SNMP access settings numbered 1-10. • The printer cannot be accessed from SmartDeviceMonitor for Admin or SmartDeviceMonitor for Client if "public" is not registered in numbers 110. When changing the community name, use SmartDeviceMonitor for Admin and SNMP Setup Tool to correspond with printer settings. • The community name can be entered using up to 15 characters. ❖ Deleting community name msh> snmp "number" clear name 79