Ricoh Aficio MP 2500 Network Guide - Page 82
route, Deleting specified IPv4 destination from Routing Table
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Monitoring and Configuring the Printer route Use the "route" command to view and control the routing table. ❖ Specified route information display msh> route get "destination" 2 • Specify the IPv4 address to destination. "0.0.0.0" cannot be specified as destination address. ❖ Enabling/disabling specified IPv4 destination msh> route active {host|net} "destination" {on | off} • You can turn the specified destination on or off. Host becomes the default setting. ❖ Adding IPv4 Routing Table msh> route add {host|net} "destination" "gateway" • Adds a host or network route to "destination", and a gateway address to "gateway" in the table. • Specify the IPv4 address to destination and gateway. • Host becomes the default setting. ❖ Setting the Default IPv4 Gateway msh> route add default "gateway" ❖ Deleting specified IPv4 destination from Routing Table msh> route delete {host|net} "destination" • Host becomes the default setting. • IPv4 address of destination can be specified. ❖ Setting IPv6 Default Gateway msh> route add6 default gateway ❖ Adding a specified IPv6 destination to Routing Table msh> route add6 {destination} prefixlen gateway • Specify the IPv6 address to destination and gateway. ❖ Deleting a specified IPv6 destination from Routing Table msh> route delete6 {destination} prefixlen • Specify the IPv6 address to destination and gateway. ❖ Display information about a specified IPv6 route information msh> route get6 {destination} • Specify the IPv6 address to destination and gateway. 74