Ricoh Aficio MP 2500 Network Guide - Page 117
Established SPX Connection with PServ, Current Interface Speed:xxxMbps
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Message List Message Problem and solutions Could not attach to P Server (In the remote printer mode) Connection to the print server has not been established. The print server has refused the connection. Check the print server configuration. Current Interface Speed:xxxMbps Speed of the network (10Mbps, 100 Mbps, or 1Gbps). Current IP address Current IPv4 address. 2 Current IPX address Current IPX address DHCP lease time expired. DHCP lease time has expired. The printer tries to discover the DHCP server again. The IP address until now becomes invalid. DHCP server not found. The DHCP server was not found. Make sure that the DHCP is on the network. dhcpcd start. The DHCPCD service (dhcp client service) has started. dpsd is disabled. Communication via PictBridge is unavailable because PictBridge is disabled in the security mode. Enable PictBridge in the security mode. Duplicate IP=(from). The same IP address (IPv,or IPv6 address) was used. Each IP address (IPv, or IPv6 address) must be unique. Check the address of the device indicated in [MAC address]. Established SPX Connection with PServer,(RPSocket=, connID=) (In the remote printer mode) Connection to the print server has been established. exiting The lpd service has ended and the system is exiting the process. Exit pserver (In the print server mode) The print server function is disabled because the necessary print server settings have not been made. Frametype = The frame type name is configured to be used on NetWare. httpd start. The httpd service has started. IEEE 802.11b mode Displays the IEEE 802.11b communication mode. IEEE 802.11b current channel IEEE 802.11b current channel Displays the IEEE 802.11b channel number. IEEE 802.11b interface up The IEEE 802.11b link has been established. IEEE 802.11b interface down The IEEE 802.11b link has been cut. IEEE 802.11b card removed The IEEE 802.11b card is not installed correctly. inetd start. The inetd service has started. 109