Ricoh Aficio MP 2500 Network Guide - Page 95

msh> wiconfig parameter, Parameter, Value con d, ID value, channel no., key value

Get Ricoh Aficio MP 2500 PDF manuals and user guides View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

Remote Maintenance by telnet ❖ Configuration msh> wiconfig "parameter" Parameter mode [ap|adhoc|802.11adhoc] ssid "ID value" channel frequency "channel no." key [ "key value" ] val [1|2|3|4] Value configured You can set the infrastructure mode(ap) , the 802.11 Ad hoc mode (802.11adhoc), or the ad hoc mode (adhoc). The default is ad hoc mode. 2 You can make settings for the SSID in the in- frastructure mode. Usable characters are ASCII 0x20-0x7e (32 bytes). An SSID value is set automatically to the nearest access point if no setting is made. If no setting is made for the 802.11 ad hoc mode, the same values for the infrastructure mode or an ASSID value is automatically set. The default is blank. You can enable or disable the WEP function. To enable the WEP function, specify [on]; to disable it, specify [off]. To start the WEP function, enter the correct WEP key. The default is "11". You can specify the WEP key when entering in hexadecimal. With a 64-bit WEP, you can use 10 digit hexadecimals. With a 128-bit WEP, you can use 26 digit hexadecimal. Up to four WEP keys can be registered. Specify the number to be registered with "val". When a WEP is specified by key, the WEP specified by key phrase is overwritten. To use this function, set the same key number and WEP key for all ports that transmit data to each other. Put "0x"on the front of WEP key. You can omit the numbers with "val". The key number is set to 1 when making these omissions. The default is blank. 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
Remote Maintenance by telnet
87
2
❖
Configuration
msh> wiconfig “parameter”
Parameter
Value configured
mode [ap|adhoc|802.11adhoc]
You can set the infrastructure mode(ap) , the
802.11 Ad hoc mode (802.11adhoc), or the ad
hoc mode (adhoc).
The default is ad hoc mode.
ssid “
ID value
”
You can make settings for the SSID in the in-
frastructure mode.
Usable characters are ASCII 0x20-0x7e (32 bytes).
An SSID value is set automatically to the
nearest access point if no setting is made.
If no setting is made for the 802.11 ad hoc
mode, the same values for the infrastructure
mode or an ASSID value is automatically set.
The default is blank.
channel frequency “
channel no.
”
You can enable or disable the WEP function.
To enable the WEP function, specify [on]; to
disable it, specify [off].
To start the WEP function, enter the correct
WEP key. The default is “11”.
key [ “
key value
” ] val [1|2|3|4]
You can specify the WEP key when entering
in hexadecimal.
With a 64-bit WEP, you can use 10 digit hex-
adecimals. With a 128-bit WEP, you can use
26 digit hexadecimal.
Up to four WEP keys can be registered. Spec-
ify the number to be registered with “val”.
When a WEP is specified by key, the WEP
specified by key phrase is overwritten.
To use this function, set the same key
number and WEP key for all ports that trans-
mit data to each other. Put “0x”on the front
of WEP key.
You can omit the numbers with “val”. The
key number is set to 1 when making these
omissions. The default is blank.