Ricoh Aficio MP 2500 Network Guide - Page 83
set, msh> set rsh6
View all Ricoh Aficio MP 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Remote Maintenance by telnet ❖ Enabling/disabling a specified IPv6 destination msh> route active6 {destination} prefixlen {on | off} ❖ Route initialization msh> route flush Note ❒ The maximum number of IPv4 routing tables is 16. 2 ❒ The maximum number of IPv6 routing tables is 2. ❒ Set a gateway address when communicating with devices on an external network. ❒ The same gateway address is shared by all interfaces. ❒ "Prefixlen" is a number between 1 and 128. set Use the "set" command to set the protocol information display "active" or "inactive". ❖ View settings The following command displays protocol information (active/inactive). msh> set ipv4 msh> set ipv6 msh> set appletalk msh> set netware msh> set smb msh> set protocol • When protocol is specified, information about TCP/IP, AppleTalk, Netware, and SMB appears. msh> set lpr msh> set lpr6 msh> set ftp msh> set ftp6 msh> set rsh msh> set rsh6 msh> set diprint msh> set diprint6 msh> set web msh> set snmp msh> set ssl msh> set ssl6 msh> set nrs 75