Ricoh Aficio MP C305 Manuals - Page 186
PCL 5c, PCL 6, PostScript 3, command to stop - pcl 5c driver
View all Ricoh Aficio MP C305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
10. Troubleshooting Message Causes Solutions "Print overrun." Images were discarded while printing. PCL 5c Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. PCL 6 Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. PostScript 3 Select a lower resolution on the printer driver. For details about how to change the resolution setting, see the printer driver Help. "Printing privileges have not been set for this document." The PDF document you have tried to print has no privileges to print. Contact the owner of the document. "Receiving data failed." Data reception was aborted. Resend the data. "The selected paper size is not supported. This job has been cancelled." Job Reset is automatically performed if the specified paper size is incorrect. Specify the correct paper size, and then print the file again. "Sending data failed." The machine received a command to stop transmission from the printer driver. Check if the computer is working correctly. "The print job has been cancelled because capture file(s) could not be stored: Exceeded max. memory." The hard disk became full after a file was stored. Delete the files stored in the Document Server or reduce the file size to be sent. "The print job has been cancelled because capture file(s) could not be stored: Exceeded max. number of files." The maximum file capacity of the Document Server was exceeded. Delete the files stored in the Document Server. 184