Samsung SCX 4828FN SyncThru 5.0 Guide (ENGLISH) - Page 44
Toner Low Alert Display Enabled
UPC - 635753612172
View all Samsung SCX 4828FN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
ITEM General Consumables Sound/Volume OPTION&DESCRIPTION Host Name, Location and Contact refers to public MIB (RFC1213). If other vendors support RFC1213, you can configure these options via SyncThru™ Admin 5. Set the option and click Add. • Asset Number: Asset number can be used to manage a device as an asset. You can add any value for this option since its purpose is to help you manage the device. Type in the number you want to use as an asset number and click Add. • Distributor Name: You can configure the distributor name for a device. You can add any value for this option since its purpose is to help you manage the device. This can be a vendor name or contact person. Type in the name and click Add. • Custom Field 1~5: Custom fields can be used when you want to mark additional information for devices. You can add any value for this option since its purpose is to help you manage the device. Type in the information you want to add and click Add. • Console Locked: This option is policy on local console usage. If you lock the console, the device will not allow use of the local device for input, but warnings and information will still be output to the console. If you disable Console Locked, the device will allow use of the local console. • Clock Mode: You can set the clock display mode - either 12-hour or 24 hour. Set the mode and click Add. • Power Save Timeout: You can set the time (in seconds) that the system will wait before entering power save mode. 0 means disabling power save mode. Set the option and click Add. • System Timeout: You can set the time (in seconds) that the system will wait for console (local use interface) input before returning to default console settings. Set the option and click Add. • Job Timeout: You can set the time (in seconds) that the system will hold a print job before aborting. Values should be 15 seconds or more for reliable job submission over congested enterprise networks. • Altitude Adjust: You can figure the atmospheric pressure, which affects print quality. Available values are Normal, High 1, High 2 and High 3. High 3 being the highest altitude. • Toner Save Enable: This option is policy for toner saving on the system. If you enable this option, the system will extend toner cartridge life without significant degradation of print quality. Set the option and click Add. • Ignore Toner Low Enabled: This option is system policy for when toner is low. If you enable this option, the system will not stop when toner is low. Set the option and click Add. • Ignore Toner Empty Enabled: This option is system policy for when toner is empty. If you enable this option, the system will not stop when toner is empty. Set the option and click Add. • Toner Low Alert Display Enabled: This option is policy for the display of toner low alert on the device itself (local user interface). If you enable this option, the system will display toner low alert on the device when a toner low condition occurs. This option is related to the Toner Low Alert Threshold option. Set the option and click Add. • Toner Low Alert Threshold(%): This option is the toner low threshold in a percentage. For example, if you configure 30 for this option and enable Toner Low Alert Display Enabled, you can see the toner low alert message on the device when the toner remaining level meets 30%. Set the option and click Add. • Key Sound Enabled: This option is policy on key sound usage. If you enable this option, pressing a key on the device will be confirmed with an audible key sound. Set the option and click Add. • Alarm Sound Enabled: This option is policy on audible alarm usage. If you enable this option, the system alarm will be confirmed with an audible alarm sound. Set the option and click Add. • Speaker (Fax Sending): This option is policy on Fax Speaker usage for outgoing calls. If you set this option to Off, the Fax Speaker is turned off. If you set this option On, the Fax Speaker is turned on throughout outgoing fax transmission. If you configure Comm., the Fax Speaker is turned on only during dialing and connection negotiation, but is turned off during fax data transfer (i.e. typical modem behavior). Set the option and click Add. • Ringer (Fax Receiving): This option is policy on the Fax Ringer usage for incoming calls. If it's set to Off, Fax Ringer is turned off. Other options are Low (quiet), Mid (Normal) or High (Loud). Set the option and click Add. Devices_ 44