Sharp MX-M700 MX-M550 MX-M620 MX-M700 Operation Manual - Page 22

PART NAMES AND FUNCTIONS Exterior (AR-F15) 1 Saddle stitch finisher (AR-F16)*1 / Finisher (AR-F15)*1 (See page 3-2) 2 Punch module (AR-PN4B)*1 (See page 3-2) 3 Inserter (AR-CF2)*1 (See page 3-14) 4 Automatic document feeder (See page 4-2) This automatically feeds and scans multiple sheet originals. Both sides of two-sided originals can be scanned at once. 5 Front cover Open to replace toner cartridge. 6 Operation panel 7 Center tray (See page 4-9) Finished sheets are deposited here 8 Bypass tray Special papers (including transparency film) and copy paper can be fed from the bypass tray. 9 Power switch (See page 1-17) Turns the power on and off. If the power does not come on when the power switch is turned on, check the main power switch to see if it is turned on. 10 Tray 5 (Large capacity tray (AR-LC6))*1 (See page 2-7) 11 Tray 5 (Large capacity tray (AR-LC7))*1 (See page 2-8) 12 Tray 1-Tray 2 The trays hold paper. Approximately 800 sheets of standard 8-1/2" x 11" or A4 size paper (20 lbs. (80 g/m2)) can be loaded in tray 1, and approximately 1200 sheets of standard 8-1/2" x 11" or A4 size paper (20 lbs. (80 g/m2)) can be loaded in tray 2. 13 Tray 3 Tray 3 holds paper. Approximately 500 sheets of standard (20 lbs. (80 g/m2)) paper can be loaded in this tray. Tabbed paper and transparencies can also be loaded. 14 Tray 4 Tray 4 holds paper. Approximately 500 sheets of standard (20 lbs. (80 g/m2)) paper can be loaded in this tray. *1 1 , 2 , 3 , 10 and 11 are peripheral devices. For information on these devices, see the explanations of the devices in the manual. 1-10