Sharp MX-M700 MX-M550 MX-M620 MX-M700 Operation Manual - Page 60
Misfeed in the tray 5 AR-LC7
View all Sharp MX-M700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
MISFEED REMOVAL ■ Misfeed in the tray 5 (AR-LC7) If a paper misfeed occurs, follow the steps below to remove the misfeed. 1 Open the side cover. 6 Remove the misfed paper. Be careful not to tear the misfed paper during removal. After removing the misfed paper, close the top cover. 2 Remove the misfed paper. Be careful not to tear the misfed paper during removal. 7 Pull out tray 1 - tray 2. Grasp the finger hold and gently open the tray. Pull the tray all the way out until it stops. 3 Gently close the side cover. 4 Close the bypass tray. NOTE If a misfeed occurs in the following situation, push tray 1 - tray 2 back in and then pull the tray out again: ● A misfeed occurs during printing from tray 5 (AR- LC7) while paper is being loaded in tray 1 - tray 2. 8 Remove the misfed paper. Check the paper transfer unit inside the tray. If there is a misfeed in the paper transfer unit, remove the misfeed. 5 Open the top cover of the AR-LC7 (tray 5). Hold the top cover open. 9 Gently push tray 1-tray 2 into the machine. Push the tray firmly all the way into the machine. Make sure that the misfeed message no longer appears (the normal message display should appear). 2-30