Sharp MX-M700 MX-M550 MX-M620 MX-M700 Operation Manual - Page 59
Misfeed in the tray 5 AR-LC6
View all Sharp MX-M700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
■ Misfeed in the tray 5 (AR-LC6) 1 Open the side cover. MISFEED REMOVAL 6 Open the top cover and remove the misfed paper. After removing the misfed paper, close the top cover. 2 Remove the misfed paper. Be careful not to tear the misfed paper during removal. 7 Remove tray 1 - tray 2. 2 Grasp the finger hold and gently open the unit. Pull the tray all the way out until it stops. 3 Gently close the side cover. 4 Close the bypass tray. 5 Open the top cover of tray 5. NOTE If a misfeed occurs in the following situation, push tray 1 - tray 2 back in to close it and then pull the tray out again: ● A misfeed occurs during printing from tray 5 while paper is being loaded in tray 1 or tray 2. 8 Remove the misfed paper. Check the paper transfer unit inside the tray and remove any misfed paper. 9 Gently close paper tray 1 - tray 2. Push the tray all the way back in. Make sure that the misfeed message no longer appears (the normal message display should appear). 2-29