Sharp MX-M700 MX-M550 MX-M620 MX-M700 Operation Manual - Page 70

FINISHER AND SADDLE STITCH FINISHER Finishing modes and finisher functions Touch the [OUTPUT] key on the main screen of copy mode to display the screen that allows selection of sort, staple sort, group function, centerline stapling, and the output tray. OUTPUT SORT STAPLE SORT GROUP FINISHER TRAY OFFSET CENTER TRAY 0 OK SADDLE STITCH PUNCH 1 [GROUP] key (See page 3-4.) When Group is selected, copies will be grouped by page. 2 [STAPLE SORT] key (See page 3-4.) When Staple Sort is selected, sorted sets will be stapled and delivered to the offset tray. (They will not be offset stacked.) Select from three stapling positions. 3 [SORT] key (See page 3-4.) When Sort is selected, sets of copies will be collated. 4 [FINISHER TRAY] key (See page 3-2.) When the offset function is selected, output is delivered offset to the finisher tray. (The finisher tray is automatically selected when the staple sort function is turned on.) 5 [OFFSET] key (See page 3-4.) The offset function operates when a checkmark appears in this key. (The offset checkmark is automatically cleared when the staple sort function is enabled.) 6 [CENTER TRAY] key If the center tray is selected, output paper will be delivered to the exit tray located above the main unit. 7 [OK] key Touch to close the [OUTPUT] screen and return to the main screen. 8 [SADDLE STITCH] key (See page 3-5.) This is displayed when the saddle stitch finisher is installed, and is used to staple pages at the center and fold them in half to create a pamphlet. Touch this key to display the pamphlet copy setting screen (page 5-6). (This is only possible when the [AUTOMATIC SADDLE STITCH] checkbox is selected in the administrator settings (see page 12 of the administrator settings guide).) 9 [PUNCH] key (See page 3-5.) This is used to punch holes in printed pages when an optional punch module is installed. NOTE When a functions is selected, it is highlighted. 3-6