Sharp MX-M700 MX-M550 MX-M620 MX-M700 Operation Manual - Page 61

REMOVING AN ORIGINAL MISFEED Removing a misfed original from the automatic document feeder If an original misfeed occurs in the automatic document feeder, follow the steps below to remove the misfed original. NOTES ● For misfeed removal in the main unit and other peripheral devices, see page 2-23 ● When a misfeed occurs, touch the [INFORMATION] key to display detailed information for misfeed removal. Check locations A and B in the diagram at left to remove the original. 2 1 Removing misfeeds from each location. ● Check location A Open the document feeder cover and gently remove the misfed original without tearing it. Close the document feeder cover. 2 Open and close the document feeder cover. Opening and closing the cover clears the misfeed display. Copying cannot be resumed until this step is performed. However, this step is not necessary after a misfeed is removed from location B. A message may appear indicating the number of originals which must be returned to the document feeder tray. Return the originals to the document feeder tray and press the [START] key. ● Check location B ● Misfeed in the transfer unit Open the document transfer cover, hold the paper guide open, and remove the misfed original. ● Misfeed in the document exit unit Open the document transfer cover. Rotate the transfer roller in the direction of the arrow and gently remove the original without tearing it. 2-31